F series fiber laser cutting machine is widely used in advertising signages and industrial economical choice. it can be with 1000-2000W laser generators as well.
1. It can cut sheet metal by Air compressor.
2. Lifespan is 100,000 hours.
3. Laser source 2years warranty.
4. Easy control system.
Environmental Protection and Energy Saving:
1. Higher electro-optical conversion rate: fiber cutting machine's electro-optical conversion rate about 30%, it is 3 times higher than co2 fiber cutting machine.
2. Higher cutting speed and efficient, 2 time faster than YAG or CO2 laser.
3. Low cost: Machine power consumption is 20% -30% of same power co2 laser
cutting machine , every hour consumed 0.5w to 1.5 w electricity,it is very easy to maintain: no need to adjust optical path.
|Model||3015F||Servo Motor||Delta / FUJI / Jaskawa / Schneider (option)||Power supply||220V/380V / 50HZ~60HZ|
|Working size||1500 X 3000 mm||Control System||A cutter / Cypone / Cypcut (option)||Positioning Accuracy||<0.1mm/m|
|Power||1000W/1500W||Reducer||Delta / Motovrio||The Best Running Speed||15-30 m/min|
|Laser generator||Raycus / IPG||Gear Rack||Taiwan||The Max Running Speed||40-60 m/min|
|Cutting Head||A cutter / OSIPRI /Raytools / WSX (option)||Guide Rail||Taiwan||Accelerated Speed||0.6 G|
Raycus Laser Generator
100000 hours service life
High Electro-optical conversion efficiency
Altitude stress-resiting capacity
The best quality and the best stable laser generator in china.
HIgh brightness , High conversion rates , hIgh work efficiency
Transmission System: Double Driver Transmission
Guide rail ( Taiwan )
Super high precision.hardness ,long life ,tolerance less than 0.02mm/min)
At the beginning of the design,we select 5-10 times normal load guide rail,which it can adapt to more stringent use of the environment and more long-term life.
Gear Rack ( Taiwan )
make sure machine accuracy/use life more longer
A cutter auto focus cutting head
auto focus cutting head can switch cutting freely between different thick material based on software memory, save more time on manual adjust focus.
keep guide rail and gear rack lubricate.
Rack and Pinon
grinding gear rack,hardness is 2-4 times ,service life is 5 times than milling gear rack
Ball loading device
The ball loading device is for material feeding, it will easy to help you to loading and unloading material.
The main function of software
auto height system
It can adjust the height of laser head automatically when material ups and downs
auto edge seeking function
When you place material in machine bed, Maybe material cannot be placed horizontally along the edge of the machine
it can auto-induct materials cutting edge and adjust cutting range according to their inclination angle automatically
Scanning cutting / fly cutting
If you need cut regular pattern in arrangement. Scanning cutting/flying cutting will save more time, reduce cutting path.
Will apply in LED signage letter (through hole letter), windows screening, Air conditioner fans etc